Jtag> flashmem 0x1e000000 cfe6358-nvr.If you're a graphic designer or you otherwise work a lot with images, File Juicer can be an extremely useful (if narrow in purpose) utility. Top/Bottom Sector Flag: Uniform top boot device Sector Protect/Unprotect Scheme: Bad valueĪCC (Acceleration) Supply Minimum: 9500 mVĪCC (Acceleration) Supply Maximum: 10500 mV Number of Erase Block Regions within device: 1 Maximum number of bytes in multi-byte program: 64 Maximum timeout for chip erase: 2097152 msĭevice Size: 16777216 B (16384 KiB, 16 MiB)įlash Device Interface Code description: 0x0002 (x8/x16) Maximum timeout per individual block erase: 4096 ms Maximum timeout for multi-byte program: 2048 us Maximum timeout for byte/word program: 64 us Typical timeout for full chip erase: 524288 ms Typical timeout per individual block erase: 512 ms Typical timeout for maximum-size multi-byte program: 64 us Typical timeout per single byte/word program: 8 us Vpp Supply Maximum Write/Erase voltage: 0 mV Vpp Supply Minimum Write/Erase voltage: 0 mV Vcc Logic Supply Maximum Write/Erase or Write voltage: 3600 mV Vcc Logic Supply Minimum Write/Erase or Write voltage: 2700 mV ![]() Primary Algorithm Command Set and Control Interface ID Code: 0x0002 (AMD/Fujitsu Standard Command Set)Īlternate Algorithm Command Set and Control Interface ID Code: 0x0000 (null) There is absolutely no warranty for UrJTAG. Welcome to change it and/or distribute copies of it under certain conditions. UrJTAG is free software, covered by the GNU General Public License, and you are *** You Selected to Flash the CUSTOM.BIN ***Įrasing block: 1 (addr = 1E000000).Doneĭone (CUSTOM.BIN loaded into Flash Memory OK)Ĭopyright (C) 2007, 2008, 2009 Kolja Waschk and the respective authors ![]() MPI register show Flash Access Base Addr : 1E000000 *** You Selected to Backup the CUSTOM.BIN *** *** Found a CFI Compatiable Flash Chip from Macronix Skippedĭetected Chip ID (VenID:DevID = C27E : 2101) EJTAG Implementation flags: R4k MIPS16 MIPS32 *** Found a Broadcom manufactured BCM6358 REV 01 CPU *** ![]() Some people reported +15∼20% extra performance with this change.Īnd this is the source code of tp0set #include #include #include #include #include #define DATA_OFFSET 20 #define RAWBYTES_LEN 4 int main ( int argc, char *argv ) The problem is that the partitions are protected and can not be modified, to do so we will have to install the kmod-mtd-rw module, which allows us to modify the partitions if we execute the command insmod mtd-rw i_want_a_brick=1.Īfter: Primary instruction cache 32kB, VIPT, 2-way, linesize 16 bytes. We will copy the file cal_data_hg556.bin to the folder “/etc” in the router and we will have it available to restore the calibration data. Use WinSCP to transfer the cal_data backup file to your computer. Now backup the mtd that matches to the cal_data partition, mtd5 in all of them.ĭd if=/dev/mtd5 of=/etc/cal_data_HG556.bin Use the method “OEM easy installation” to flash 17.01.4 version, cal_data is not destroyed, and wifi is fully functional. There is an easy way if you flash from stock firmware.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |